Jun. 06, 2020
It is inevitable that there will be failures in the use of packaging box equipment. Timely repair and maintenance are conducive to the use of the equipment. The following is a brief introduction to the maintenance notes of the equipment:
1. If the packing box equipment is worn or damaged during the production process and affects the production, it is recommended to stop the operation immediately and quickly check the equipment for problems.
2. Secondly, the packing box equipment is the same as other equipment that requires electricity. The equipment must be placed in a flat place and a stable working environment can better operate the equipment.
3. The circuit of the equipment cannot be modified at will, nor can lights be hung on the equipment at will to avoid the influence of the equipment.
If the equipment needs to have a longer service life, it must be continuously repaired and maintained. In the daily maintenance, some electrical circuits that are not used must be removed in time to avoid affecting the work efficiency of the equipment.
The following inspections are required for the packaging equipment components:
1. First confirm whether each connection is firm, whether there is any looseness, whether each rotating part is flexible, and whether there is any blocking phenomenon.
2. Whether the lubricating parts of the equipment are well lubricated, whether the amount of oil is sufficient, and whether the lubricating oil in each transmission gear box is above the oil gauge line.
3. After passing the above inspection, start the motor for no-load trial operation, mainly to check whether there is any abnormality in the pressure profile. After the end of the dry operation, check whether the temperature rise of each rotating part is normal, and whether there is oil leakage, such as If there are problems, they should be eliminated and resolved in time.
