Apr. 15, 2020
The importance of the correct operation of floor support equipment, the floor support equipment should not only be used but also maintained. Proper maintenance methods can greatly extend the life of the tile press equipment. Usually, we use the floor support equipment in the process of use Pay attention to the operation process to see whether it is the same as the previous operation, and whether there is any difference.
We need to constantly check whether each part is stable, and clean all parts frequently, especially the oil tank and oil filtering equipment should be cleaned to keep the oil pipe smooth.
We must regularly replace the hydraulic oil floor bearing equipment. When replacing, we must check and clean the oil tanks, oil pipes and other oil lines in time. If there are foreign objects in the hydraulic oil, it will cause the hydraulic system to be abnormal and increase. The operating time of oil pumps, oil cylinders, directional valves, etc., so we need to pay attention to the use of floor support equipment at all times.
In the process of using floor support equipment, we must first pay attention to the operation of floor support equipment, and find the problem to solve the problem, do not think that the problem is small, and do not solve it, sometimes small problems can also cause major failures. The maintenance of the tile machine must be planned and regularly maintained. The maintenance of the tile machine is well done, which plays a great role in extending the life of the tile machine. Importance. The worktable of the color steel tile pressing machine has six processes, (that is, the hexagonal runner), the table is turned over, in addition to the first-level mechanical indexing and positioning, a set of precision positioning mechanisms is also provided to ensure each stamping process In the middle, the correct positioning of the workbench mold, the slide table on which the upper mold is installed is a box structure, the slide rail and the upper rail of the fuselage, the contact length is large, each time the upper mold is stamped, the process has a second stamping on the mud billet After the first pressing of the tile blank in place, the upper mold rises 10㎜, after the mud blank is fully exhausted, the upper mold presses the tile blank down into place again, and then returns to the highest position, so the mold has a long service life and the quality of the pressed product it is good.
Type 840 color steel tile press is a hydraulic press used to shape and press the rough tile blanks extruded and cut by the vacuum screw extruder when producing glazed tiles. The automatic tile press machine can be installed and used separately, but it needs to be manually loaded. It can also be equipped with an automatic loading rack, a blank unloading robot, an extruder, a tile cutting machine, a blank feeder, and a tile conveying line, etc., which does not require manual manipulation. China's glazed tile industry institute The automatic tile press used is first imported from Germany, Italy, France and other countries.
