Aug. 04, 2019
The glazed tile unit includes forming mainframe, hydraulic station, discharging rack, forming shearing, control box and discharging rack. It is equipped with imported PLC, using computer operation panel and text screen. It is widely used in industrial civil buildings, such as factory buildings, warehouses and garages. , hangars, stadiums, exhibition halls, theaters and other rooms and walls.
The glazed tile machine control system is easy to operate. The normal automatic production does not need to be reversed first, but it is advanced, pressed and cut. The precision is high, the cutting precision of each piece is less than 0.1mm, and the process requirements are met. The program runs stably and reliably.
The glazed tile machine is divided into three parts, the roller forming part, the pressing part, and the cutting part. The roller forming part is dragged by the motor, and the chain drives each roller to rotate. The pressing part is a hydraulic cylinder that drives the mold to move up and down, and can be colored. The steel is pressed into many sections and is shaped like a glazed tile. The cutter part is a hydraulic cylinder that drives the tool to move up and down, and can cut the colored steel tile. The production process of the glazed tile forming machine is as follows: the colored steel plate enters the forming part of the roller table, and after molding, to the pressed part, Pressed into a section of equidistance, the cutter is responsible for fixed length cutting.
Glazed tile machine control introduction:
The execution part has two drive solenoid motor, hydraulic station motor and two hydraulic solenoid valves.
The glazed tile forming machine has the following parts: a pulse encoder for detecting the length of the colored steel tile, a press-type upper and lower stroke switch, a cutter upper and lower stroke switch, a press-type upper and lower operation button, a cutter upper and lower stroke button, an emergency stop switch, and a hydraulic pressure. Start and stop switch and so on.
PLC selects KDN-K306-24AR of KDN-K3 series. It has 14 input / 10 relay outputs, just meets the input and output requirements. With DELTA text screen, you can complete parameter setting, alarm display, help information, production. Data display and so on.
The glazed tile machine should use the high number pulse input function, the delta high number input performance is excellent, the AB phase anti-interference ability is selected, and the fixed value interrupt function is used to ensure the accuracy. The glazed tile forming machine has many parameters to be set, and is set by the text screen. There are two kinds of parameter settings: device parameters and user parameter settings. The device parameters are: single pulse length, overshoot, pressure distance, molding time, cutter time, etc.
