Oct. 28, 2019
Bending machine as a kind of basic machinery, if its maintenance measures can improve the efficiency of the work and the service life of the bending machine itself, we will introduce the maintenance content below:
First, the filter
1. The filter should be replaced or thoroughly cleaned each time the oil is changed;
2. The air filter on the fuel tank is inspected and cleaned every 3 months, and changed once every year.
Second, hydraulic components
1. Clean hydraulic components (substrate, valve, motor, pump, oil pipe, etc.) every month to prevent dirt from entering the system and not using detergent;
2. After using the new machine for one month, check whether there is any deformation at the bend of each tubing. If there is any abnormality, it should be replaced. After two months of use, the joint of all fittings should be tightened. Shut down when doing this work, the system has no pressure.
Third, the hydraulic oil circuit
1. Check the oil level of the fuel tank every week. If the hydraulic system is repaired, check it. The oil level should be filled with hydraulic oil below the oil window.
2. The system oil temperature should be between 35 °C and 60 °C, and should not exceed 70 °C. If it is too high, it will cause deterioration of oil quality and accessories.
3. The hydraulic oil used in this machine is ISO HM46 or MOBIL DTE25;
4. After the new machine is working for 2000 hours, the oil should be changed. After every 4000 to 6000 hours of operation, the oil should be changed. For each oil change, the fuel tank should be cleaned;
