Aug. 26, 2019
The testing part of the roll forming machine includes: a pulse encoder for detecting the length of the colored steel tile, a press-type upper and lower stroke switch, a cutter upper and lower stroke switch, a press-type upper and lower operation button, a cutter upper and lower stroke button, an emergency stop switch, Hydraulic start-stop switch and so on.
The characteristics of the roll forming machine control system: The control system is easy to operate, and the normal automatic production does not need to be reversed first, but is advanced, pressed, and cut. The precision is high, and the cutting precision of each piece is less than 0.1mm, which meets the process requirements. The program runs stably and reliably. The execution part has two drive solenoid motor, hydraulic station motor and two hydraulic solenoid valves.
The structure of the roll forming machine is reasonable and easy to operate, full of functions, feeding, pressing and cutting into plates. It adopts precision low-speed metering pump, frequency conversion speed regulation, computer control and accurate measurement. The color steel plate equipment adopts automatic control software to realize Production information management. The whole unit automation control system uses a highly integrated network to make the automation system superior. The arc glazed tile unit includes the forming host, hydraulic station, discharge rack, forming shear, control box and discharge rack.
1. Dimensions of the discharge rack: length 860mm × width 1450mm × height 1124mm
2. Maximum speed of molding machine: 10m/min
3. Forming color steel plate thickness: 0.5-0.6mm
4, forming color steel plate expansion width: 1000mm
5, the effective width of the molded glazed tile: 828mm, deviation ± 1 / 100
6, shaped glazed tile wave height: 28mm, deviation 28-0.3
7, roll shaft diameter: Φ70mm
8, computer operation panel, text screen
9, the unit includes: molding host, hydraulic station, discharge rack, molding shears, control box, discharge rack.
