Jun. 02, 2019
Before using the color steel tile press, check whether the connection is firm. The mounting bolts/nuts are tightened. The left and right cabinets should be filled with lubricating oil to energize the heads for test. First, observe the empty car and see if there is any shock. Whether the noise, the oil window comes to the oil, whether the movement of each component is coordinated, the mold can be installed after everything is normal. When the C-type steel machine is installed with the mold, the power supply must be blocked, and the anti-slip seat is naturally landed, causing an accident. The upper mold is mounted on the bottom surface of the sliding seat. And place the pad of appropriate thickness to ensure that the gap between the upper and lower molds is averaged after the upper and lower molds are closed, and the interval between the upper and lower molds is the thickness of the required blank. Then the upper mold is used as the standard, the table is indexed, and the remaining five are installed. Pay the mold, all the upper and lower molds can be installed before driving to press the tile.
Structure and material of color steel tile press: Cold-formed steel is the main material for making light steel structure. It is made by cold-bending forming of steel plate or steel strip. The wall thickness of C-type steel machine can be made very thin and greatly simplified. The production process is used to improve the production efficiency. It is possible to produce cold-formed color steel equipment of various profiles and different materials with uniform wall thickness and complicated cross-section shape which are difficult to produce by the general hot rolling method. However, due to the complicated structure of the multi-link suspension, High cost, many parts, time-consuming assembly, and to achieve the durability of non-independent suspension, it is always necessary to keep the connecting rods from deformation and displacement. Color steel presses are very sophisticated in material use and structural optimization, so many The connecting rod suspension is mainly pursued for the pursuit of excellent handling and driving comfort. At present, the new high-grade cars of the color steel tile press have already adopted this suspension. They are manufactured by the plastic extrusion molding method. Large-scale external wall sound insulation and dry hanging ceramic plates, floor tiles, load-bearing bricks, Fengwo ceramics and other products; launched to fill the domestic blank WYJ150 pressure tile machine, single machine Nissan Xiwa, Zhongwa more than 2,000 square meters, its performance is better than foreign Machinery is highly sought after. Only Syria has ordered 2 presses. The market has broad prospects. Automatic straightening and cutting machine, special combined electric excavator for brick factory, automatic lifting and transporting machine, pulverized coal machine series, free brick Machine, cement gray sand brick machine, hollow block brick machine, color cement tile machine and other machinery. The factory has strong technical force, development, processing and manufacturing to quality inspection and other technical quality assurance system, color steel tile machine products sell well All over the country.
