May. 25, 2020
The C-shaped steel products rolled by the C-shaped steel equipment have good tensile and bending performance, good straightness, automatic fixed-length cutting, automatic punching, high degree of automation, fast and convenient installation, and the product can be used as the main body of large and medium-sized industrial civil buildings. Force structures, such as roof load-bearing load and wall flat support of factory buildings, warehouses, hangars, hangars, exhibition halls, theaters, stadiums, and market sheds. Cold-formed steel is the main material for making lightweight steel structures. The steel belt is formed by cold bending. The wall thickness of the C-shaped steel machine can be made very thin, and the production process is greatly simplified and the production efficiency is improved.
C-shaped steel machine equipment process flow:
The strip steel is fed from the tail of the equipment, and pressed by various pressing rollers to form C-shaped steel and then sent out from the head. In the traditional process, the C-shaped steel needs to be manually cut to a fixed length after being pressed and then transported to the punching equipment according to the customer's required size Drilling, production cannot be continuous, and the efficiency is not high. Technicians work closely with equipment manufacturers to gradually improve the production process, and finally achieve automatic control of the entire process, which dramatically improves production efficiency and increases the technical content and customer equipment. Added value.
Precautions for installing C-beam machine
1.Before setting up, the person in charge of the unit project should carry out the technical plan for the frameworker according to the requirements of the steel structure tile mechanical detachment plan. When the horizontal bar is connected with the vertical bar, the two also cooperate.
2. Material preparation, inspection and verification of steel pipes, fasteners, steel structure tile pressing machines, nets, etc. entering the site.
3. The shelf worker should hold an effective operator's operation certificate for the job. Climbing shoes and other hard and slippery shoes should be elevated. The operating tools and small parts should be placed in the tool bag, and the cuffs, neckline and trousers should be tightened to prevent hook Hanging is dangerous.
4. The cumulative error of the steel structure C-shaped steel machine installation exceeds the allowable deviation.After each step is completed, the school's step distance, vertical distance, horizontal distance, and verticality of the vertical rod are adjusted according to the regulations.
5.Familiar with the drawings and the construction site, grasp the structural characteristics of the plane and elevation of the building, the environmental conditions, and determine the steel according to the structural requirements in the `` Technical Specifications for Fastener-Type Steel Pipe Pressing Machinery for Construction Construction '' (JGJ130-2001) The mechanical stepping of the structural tile, etc., and the specific implementation steps.
