Sep. 18, 2019
The C-shaped steel equipment is divided into three parts, the roller forming part and the cutting part. The roller forming part is dragged by the motor, and the chain drives each roller to rotate. The pressing part is a hydraulic cylinder that drives the mold to move up and down, and can press the color steel into Many sections, shaped like glazed tiles. The cutter part is a hydraulic cylinder that drives the tool up and down to cut off the colored steel tile.
The production process is as follows: the color steel plate enters the forming part of the roller table, and after molding, it is pressed into the pressing part, and is pressed into a section of equal distance, and the cutter is responsible for the fixed length cutting.
The advantages of C-beam equipment are as follows:
(1) Color steel tile pressing machine The equipment adopts high level automatic control software to realize production information management.
(2) The whole unit automation control system adopts a highly integrated network to make the automation system superior in performance.
(3) Color steel tile equipment also has the advantages of operation, maintenance, maintenance, mechanical debugging, and easy mold change.
Precautions for use: C-type steel machine equipment maintenance and maintenance If you do not understand the structure and performance of the machine and the operating procedures, you must not start the machine. It is forbidden to work beyond the small closing height, that is, the upper surface of the upper sliding box to the working surface is 290mm. After the mold is clamped, the height of the upper and lower pads plus the thickness of the tile blank is not allowed to exceed 290mm. The mold should be designed according to this requirement to avoid machine accidents. Always pay attention to the observation, sliding the cabinet and the sides. The height of the inner lubricant. The equipment should be wiped frequently, kept clean, no muddy water.
