Oct. 09, 2019
The mold used by C Purline Roll Forming Machine requires an upper mold and six lower molds of the same size. The upper mold and the lower mold are installed first. The lower mold is directly mounted on the hexagonal runner table. The upper mold is mounted on the bottom surface of the slide. On the upper, the color steel pressing machine is placed with a pad of appropriate thickness to ensure that the gap between the upper and lower molds is uniform after the upper and lower molds are closed, and the distance between the upper and lower molds is equal to the thickness of the required blank. Then the upper mold is prevailed, the workbench is indexed, and the remaining five lower molds are installed. After all the upper and lower molds are installed, the brake can be driven.
C Purline Roll Forming Machine should check whether the connection is firm before use, whether the bolts and nuts are tightened, and the lubricating oil should be added to the left and right chassis to start the machine for commissioning. First observe the empty car and observe whether there is vibration or noise. Whether the oil window comes to the oil and whether the movement of each component is coordinated.
C Purline Roll Forming Machine can only be installed after the mold is normal. When installing the mold, the power must be cut off, the motor belt or the large gear should be manually moved, the C-shaped steel machine can make the table shift, and the slide can be raised to the high point. The tile pressing machine is supported by an object between the workbench and the bottom surface of the sliding seat, so that the anti-slip seat naturally falls, causing an accident.
